Sony XDS-1000 Operation Manual page 82

Item number Item name
828 SDI AUDIO OUTPUT SELECT
Sub-item
1 CH1/CH2
2 CH3/CH4
831 TS OUT AUDIO MODE
a) When the optional PDBK-202 is installed.
b) Not displayed when the unit is in 23.98P mode.
Item number Item name
920 SD-SDI H-ANC CONTROL
Sub-item
1 AUDIO 5CH-8CH
2 RP188 ATC
925
HDMI OUTPUT SELECT
926
DVB-ASI SETTING
Sub-item
1 I/O MODE
2
TS MODE
3 ENC RATE(Mbps)
4
RESOLUTION
5 PROGRAM NUMBER
82
Setup Menu
Menu items in the 800s, relating to audio control
Settings
Select the audio signals to assign to SDI audio output channels.
tr1/2: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.
tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4.
tr3/4: Tracks 3 and 4 assigned to audio output channels 3 and 4.
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4.
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4.
a) b)
Select the number of audio output channels for DVB-ASI TS signals.
4ch: 4 channels
2ch: 2 channels
Menu items in the 900s, relating to digital process
Settings
a)
Select whether to add information to the SDI output.
off: Do not add digital audio data channels 5 to 8.
on: Add digital audio data channels 5 to 8.
off: Do not add RP188 timecode data.
on: Add RP188 timecode data.
a) Select the resolution of the video output from the HDMI OUTPUT
connector.
1080i, 480i, 480P (59.94i, 29.97P mode)
1080i, 576i, 576P (50i, 25P mode)
720P, 480i, 480P (59.94P mode)
a) b) Sets the parameters for DVB-ASI output, and specifies the number of the
program to receive when DVB-ASI signals are input.
Sets DVB-ASI input /output.
input [in]: Fixedly input mode
output [out]: Fixedly output mode
c) Selects the TS mode. (59.94i/29.97P/50i/25P mode only).
HDV: HDV mode
Manual [manu]: Encoding rate mode
Sets the encoding rate.
15.00Mbps to 25.00 to 43.25Mbps: Sets the encoding rate.You can set
the rate in units of 0.01 Mbps (or units of 0.20 Mbps, when the
SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
c) Selects the number of horizontal pixels for the 1080i format. (59.94i/
29.97P/50i/25P mode only).
1440: 1440
When sub-item TS MODE of menu item 926 is set to "HDV", this is
fixed as "1440".
When the encoding rate is set to lower than 35.00 Mbps with sub-
item ENC RATE(Mbps), this is also fixed as "1440".
1920: 1920
Specifies a DVB-ASI input/output signal program number.
1 to 100 to 65535: Sets the program number (decimal).
You can set this in units of 1 (or 20 when the SHIFT button is held
down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".