Switching Between Sxs Memory Cards - Sony XDS-1000 Operation Manual

Status indications by the MEMORY ACCESS A/B
lamps
Card slots A and B are accompanied by the respective
lamps to indicate their statuses.
Lamp Slot statuses
Lights in orange Accessing the loaded SxS memory card
(writing/reading data)
Lights in green Standby (ready for recording or playback
using the loaded SxS memory card)
Off • No SxS memory card is loaded.
• The loaded card is invalid.
• An SxS memory card is loaded, but
another slot is selected.
To remove an SxS memory card
1
Press the eject button to release the lock, then pull the
button out.
Press the button
once to release
the lock
2
Press the eject button again to remove the card.
Note
Data are not guaranteed if the power is turned off or a
memory card is removed while the card is being accessed.
All data on the card may be destroyed. Be sure that the
MEMORY ACCESS A/B lamps are lit in green or off
when you turn off the power or remove memory cards.
46
Handling SxS Memory Cards
Switching between SxS memory
cards
When SxS memory cards are loaded in both memory card
slots A and B, press the MEMORY button to select the
card you wish to use.
Note
The MEMORY button is disabled while copying is in
progress, that is, switching is not executed even if you
press the button.