Sony XDS-1000 Operation Manual page 79

Item number Item name
705 EDGE SUBCARRIER REDUCER
a)
MODE
707 FORCED VERTICAL
INTERPOLATION OFF
710 INTERNAL VIDEO SIGNAL
GENERATOR
713 VIDEO SETUP REFERENCE
Sub-item
OUTPUT LEVEL In 59.94i/59.94P/
715 VIDEO GAIN CONTROL
716 CHROMA GAIN CONTROL
717 CHROMA PHASE CONTROL
718 SETUP LEVEL (59.94i/59.94P/
29.97P mode)/BLACK LEVEL (50i/
a)
25P mode)
719 SYSTEM PHASE SYNC
720 SYSTEM PHASE SC
Menu items in the 700s, relating to video control
Settings
Select whether to enable the edge subcarrier reducer (ESR).
on: Enable ESR.
off: Do not enable ESR.
The "Y-add" function is normally switched on automatically during jog or
variable-speed playback. This item selects whether to force the "Y-add"
function off.
auto: Automatically switch the "Y-add" function on.
forced YADD off [off]: Force the "Y-add" function off.
The "Y-add" function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.
Select the test signal to be output from the internal test signal generator.
When INT SG on page P1 INPUT of the function menu is set to "ON",
the internal test signal generator operates to output the selected test
signal. This signal can also be recorded.
Off [OFF]: Do not output test signal.
75% Color Bars [CB75]: 75% color bar signal
100% Color Bars [CB100]: 100% color bar signal
Multi Burst [MLTBS]: Multi-burst signal
10 steps [10STP]: 10-step signal
Pulse and Bar [PLSBR]: Pulse and bar signal
Ramp [RAMP]: Ramp signal
Black [BLACK]: Black signal
ARIB Color Bars [ARBCB]: ARIB color bar signal (modify width: 100%)
Note
"ARIB Color Bar" cannot be specified when SD recording is selected. If
"ARIB Color Bar" is selected, the selection is changed to "75% Color
Bars" ([CB75]).
Set the video setup amount to be added to the composite output signal
(in 59.94i/59.94P/29.97P mode only).
Add the setup level selected by this item to the output signal.
29.97P mode 0.0%, 7.5%
(UC)
In 59.94i/59.94P/ Add the setup level selected by this item to the output signal.
29.97P mode (J) 0.0%, 7.5%
a)
Adjust the video output level of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–2048 to 0 to 848
a)
Adjust the chroma output level of SD video signals output from the SD-
SDI OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–2048 to 0 to 848
a)
Adjust the chroma phase of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–128 to 0 to 127
Adjust the setup level (black level) of SD video signals output from the
SD-SDI OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT
connectors.
–272 to 0 to 272
a)
Adjust the sync phase of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
–128 to 0 to 127
a)
Adjust the subcarrier phase of SD video signals output from the SD-SDI
OUTPUT, COMPOSITE OUTPUT, or HDMI OUTPUT connectors.
0 to 511
79
Setup Menu