Synchronization Reference Signals - Sony XDS-1000 Operation Manual

Synchronization Reference Signals

The synchronization reference signal generator of this unit
synchronizes to a reference signal input to the REF.
VIDEO INPUT connector or to a video input signal.
External synchronization is as follows, depending on the
Input to HD/SD-SDI
a)
INPUT connector
Yes
Yes
No
No
a) Same as when INT SG on page P1 INPUT of the function menu is set to
"ON".
Synchronization reference signals when
you are recording, playing, or editing 720P
signals
When you are recording, playing, or editing 720P signals,
set OUT REF on the HOME page of the function menu to
"REF", and synchronize the synchronization reference
signal generator of this unit to a reference signal input to
the REF. VIDEO INPUT connector. The following
reference signals can be used.
720/59.94P system: 1080/59.94i tri-level sync signal, 525
black burst signal
720/50P system: 1080/50i tri-level sync signal, 625 black
burst signal
When you directly interconnect video I/O connectors
between two of this unit or between this unit and the XDS-
PD1000/PD2000 or PDW-F1600/HD1500/F800/700, you
can record and dub 720P signals even if you set OUT REF
on the HOME page of the function menu to "INPUT".
36
Synchronization Reference Signals
Input to REF. VIDEO
INPUT connector
Yes
No
Yes
No
setting of OUT REF on the HOME page of the function
menu, and on the type of the selected input signal. Video
output signals are always synchronized to the internal
synchronization reference signal.
Setting of OUT REF on the HOME page
REF
Synchronize to the signal input to
the REF. VIDEO INPUT connector
No external synchronization is
made
Synchronize to the signal input to
the REF. VIDEO INPUT connector
No external synchronization is made
INPUT
Synchronize to the signal input to
the HD/SD-SDI INPUT connector
Synchronize to the signal input to
the HD/SD-SDI INPUT connector
No external synchronization is
made