Sony XDS-1000 Operation Manual page 85

Item number Item name
954 DETAIL GAIN (UC)
955 LIMITER (UC)
956 CRISP THRESHOLD (UC)
957 LEVEL DEPEND THRESHOLD
a)
(UC)
958 H DETAIL FREQUENCY (UC)
959 H/V RATIO (UC)
Menu items in the 900s, relating to digital process
Settings
a)
Adjust the up-converter image enhancer. Adjust the sharpness of edge
enhancement.
00 (HEX) to 40 (HEX) to 7F (HEX)
a)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 (HEX) to 20 (HEX) to 3F (HEX)
a)
Adjust the up-converter image enhancer. Set the threshold amplitude for
emphasis (signals of amplitude lower than the threshold are not
emphasized).
00 (HEX) to 08 (HEX) to 0F (HEX)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 (HEX) to 08 (HEX) to 0F (HEX)
a)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 (HEX) to 03 (HEX) to 07 (HEX)
85
Setup Menu