Extended Menu Operations - Sony XDS-1000 Operation Manual

Item number Item name
965 IMAGE ENHANCER (INPUT UP
CONVERTER)
Sub-item
1
ENH SETTING
2 CONVERT
3 H CROP P
4 L BOX P
5 CNV PROC
6 DETAIL
7 LIMITER
8 CRISP
9 DEPEND
10 H DETL F
11 HV RATIO
a) Not displayed when the unit is in 23.98P mode.
b) When the optional PDBK-202 is installed
c) Not displayed when the unit is in 720P mode.

Extended menu operations

The extended menu can be used with the same procedures
as in the basic menu.
However, since with the factory default settings the
extended menu is not displayed, it is first necessary to
enable display of the extended menu.
86
Setup Menu
Menu items in the 900s, relating to digital process
Settings
Set up the operation of the up converter image enhancer for SD input,
a) separately from the settings for playback (menu items 950 to 959).
pb: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for playback (menu
items 950 to 959). (Settings for sub-items 2 to 11 under menu item
965 become invalid.)
input: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for sub-items 2 to 11
under menu item 965 (separate settings during input of SD signals
from those during playback).
Select the up-converter mode.
EDGE CROP [CROP]: Select the edge-crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
When sub-item CONVERT is set to "CROP", adjust the H-crop
(horizontal crop) position for up converter output in edge crop mode.
–120 to 0 to 120
When sub-item CONVERT is set to "L-BOX", adjust the vertical location
of the position where the picture is cut out for up converter output in letter
box mode.
–120 to 0 to 120
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]: Frame or field is selected automatically.
Adjust the up-converter image enhancer. Set the sharpness of edge
enhancement.
00 to 40 to 7F (as a hexadecinal value)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 to 20 to 3F (as a hexadecinal value)
Adjust the up-converter image enhancer. Set the threshold amplitude at
which low amplitude signals are not emphasized.
00 to 08 to 0F (as a hexadecinal value)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 to 08 to 0F (as a hexadecinal value)
Adjust the up converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 to 03 to 07 (as a hexadecinal value)
To enable display of the extended menu
Proceed as follows to use the maintenance menu.
1
Holding down the PAGE/HOME button and the
SHIFT button, press the MENU button.
The maintenance menu appears on the video monitor
screen.