Sony XDS-1000 Operation Manual page 53

4
Do one of the following to select the clip to copy.
• Turn the PUSH SET knob.
• Press the arrow buttons.
To select several continuous clips
Move the cursor to the start or end of the clips that you
want to select, and then proceed as described above
while holding down the SHIFT button.
When copying all clips on the media
Proceed to step 5 without carrying out clip selection
operation.
5
Press the COPY button.
The Clip Copy screen appears.
To change the copy source clip
Press the RETURN button to return to the clip list
screen, and then select another clip.
To cancel the copy operation
Press the CANCEL function (F6) button.
6
Press the SOURCE function button (F1) and select
"SELECTED" or "ALL".
To copy the clips selected in step 4: Select
"SELECTED".
To copy all the clips on the SxS memory card:
Select "ALL".
7
Press the START function (F5) button.
Copying of the clips starts.
The progress of the copying is shown in the Clip Copy
screen, and the copy icon lights in the status display
area.
To turn off the display of copy processing progress
Press the DISP OFF function button (F6).
To perform an internal storage operation during
copy execution
Press the INTERNAL button to switch to the internal
storage screen.
The progress of copy processing is not shown in the
internal storage screen. To show the progress of copy
processing, press the COPY button. To hide the
display of copy processing progress, press the DISP
OFF function button (F6).
To abort the copy operation
Press the ABORT function button (F1), or
alternatively press the COPY button and then press the
RESET button.
The data having already been transferred to the
internal storage remains on that media.
If the copy operation is completed successfully, the
message "Copy was successful." appears.
8
Press the OK function (F5) button.
The Clip Copy screen disappears, and you return to the
original screen.
To delete clips/files on the SxS memory card
You cannot delete clips/files from an SxS memory
card currently loaded in this unit.
To perform deletion, insert the desired memory card
into the ExpressCard slot of a computer or into an SxS
memory card reader connected to a computer, and use
XDCAM Browser or other appropriate application
software.
To copy an EDL file
An EDL can be copied by an operation similar to a clip
copy operation. However, it is necessary to make a copy of
all clips referenced by the EDL in advance. Therefore,
"ALL" is automatically selected in step 6 of the procedure
for "Copying the SxS memory card clips to the internal
storage" (page 52).
53
Copying