Sony XDS-1000 Operation Manual page 22

f Clip information
Displays clip information.
Clip name
Duration
Clip number/total number of clips
During playback, the icons in the following table appear to
indicate the properties that have been set in a clip.
Icon Description
An OK flag is set
An NG flag is set
A KEEP flag is set
A shot mark is set
The clip is locked (protected)
g Recording or chase play display
When the recording media is the internal storage (hard disk
drives), an icon appears to indicate the status of the unit
( : recording, : chase play).
h Time data display area
A Remaining media capacity for recording or playback
B REC RUN/FREE RUN
C Timecode generator mode
D VITC
F Time data
E Time data type
22
Front Panel
Codec
Video format
System frequency
Audio format
Property icons
G DF/NDF
indication
G DF/NDF
(TCG)
indication
(TCR)
A Remaining media capacity for recording or
playback: Displays the amount of remaining capacity
for recording or playback on the media.
B REC RUN/FREE RUN: Displays the timecode run
mode. The run mode is set with RUN MODE on page
P4 TC of the function menu (see page 43).
C Timecode generator mode: Displays the timecode
source and generation method (preset or regenerate).
These are set with TCG and PRST/RGN on page P4
TC of the function menu (see page 43).
D VITC: Lights in the following cases.
• When VITC is read in playback mode. (This has no
relations to the display in the time data display
area.)
• When VITC recording is possible.
E Time data type: Displays the type of time data
displayed in the time data display area. The type of
time data is selected with CNTR SEL on the HOME
page of the function menu (see page 41).
Display Type of time data
TC Timecode
COUNTER Elapsed recording/playback time
UB User bits
VITC VITC
VIUB VIUB
TCG Timecode generator value
UBG User bits generator value
F Time data: Normally displays timecode or VITC,
according to the selection made with TCR on page P4
TC of the function menu.
G DF/NDF indication: Displays the frame count mode
for the internal timecode reader (TCR) and internal
timecode generator (TCG). The frame count mode is
set with DF/NDF on page P4 TC of the function menu
(see page 43).
Display Frame count mode
. DF (drop-frame mode)
: NDF (non-drop-frame mode)
i Status display area
A Error, warning, and alarm messages
D Network connection display
E Network remote connection display
F Recording display
G Playback display
B Delete icon
C Copy icon