Hdd Data Cable Routing For Sas Raid Controller Cards In Eight-Disk Capable Sparc Enterprise T5140 Servers - Fujitsu SPARC ENTERPRISE T5140 Service Manual

HDD Data Cable Routing for SAS RAID
Controller Cards in Eight-Disk Capable
SPARC Enterprise T5140 Servers
There are two SAS controller card options for the SPARC Enterprise T5140 and T5240
servers (both options support RAID). The standard option uses the on-board SAS
controller card preinstalled on every server. The second option is a StorageTek SAS
RAID Internal Host Bus Adapter (HBA) PCIe card. The internal cabling of your
server will be different depending on the SAS controller card option you choose.
FIGURE:
Figure Legend
1
2
3
4
194 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Hard Drive Data Cable Routing for SAS RAID Controller Card in Eight-Disk
Capable SPARC Enterprise T5140 Servers
Routing the data cable through the left channel on the motherboard handle
Routing the data cable through the right channel on the motherboard handle
Routing the cable between the two processors
Routing the cables through the fan midwall to the hard drive backplane