Fujitsu SPARC ENTERPRISE T5140 Service Manual page 227

The following table identifies the I/O components in the server and points to
instructions for servicing them.
I/O Components (SPARC Enterprise T5240 Servers)
TABLE:
Item FRU
1 Top cover
2 Hard drive backplane
3 Hard drive cage
4 Left control panel light
pipe assembly
5 Hard drives
6 DVD/USB module
7 Right control panel light
pipe assembly
Replacement Instructions
"Remove the Top Cover"
on page 67
"Install the Top Cover"
on page 177
"Servicing the Hard
Drive Backplane" on
page 156
"Servicing the Hard
Drive Cage" on page 151
"Servicing Front Control
Panel Light Pipe
Assemblies" on page 160
"Remove a Hard Drive"
on page 71
"Install a Hard Drive"
on page 73
"Servicing DVD/USB
Modules" on page 144
"Servicing Front Control
Panel Light Pipe
Assemblies" on page 160
Identifying FRUs in SPARC Enterprise T5240 Servers
Notes
Removing top cover if
the system is running
will result in immediate
shutdown.
Must be removed to
service hard drive
backplane and front
control panel light pipes.
Metal light pipe bracket
is not a FRU.
Hard drives must be
removed to service the
hard drive backplane.
Must be removed to
service the hard drive
backplane.
Metal light pipe bracket
is not a FRU.
FRU Name (If Applicable)
N/A
/SYS/SASBP
N/A
N/A
See "Eight-Drive
Capable Backplane
Configuration
Reference" on page 78 or
"Sixteen-Drive Capable
Backplane Configuration
Reference" on page 79
/SYS/DVD
/SYS/USBBD
N/A
201