8. Attach the power cables.
See
9. Power on the server.
See
On the Server Using the Front Panel Power Button" on page
Related Information
"Remove a Memory Mezzanine Assembly" on page 118
■
"Install the Top Cover" on page 177
■
"Connect Power Cords to the Server" on page 181
■
"Power On the Server Using the poweron Command" on page 181
■
"Power On the Server Using the Front Panel Power Button" on page 182
■
Servicing the Motherboard Assembly
These topics explain how to remove and install the motherboard assembly.
"Motherboard Servicing Overview" on page 122
■
"Remove the Motherboard Assembly" on page 123
■
"Install the Motherboard Assembly" on page 125
■
Motherboard Servicing Overview
The motherboard assembly must be removed in order to access the following
components:
Power distribution board
■
Power supply backplane (SPARC Enterprise T5240 server)
■
Paddle card
■
Note – This procedure requires removing the server from the rack.
Caution – The server is heavy. Two people are required to remove it from the rack.
122
SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
"Connect Power Cords to the Server" on page 181
"Power On the Server Using the poweron Command" on page 181
or
"Power
182.