Fujitsu SPARC ENTERPRISE T5140 Service Manual page 218

FIGURE:
Figure Legend
1
2
3
Data Cable Routing Details (Four-Disk Capable SPARC Enterprise T5140 Servers)
TABLE:
Item FRU Connections
3 HDD data Lower cable in the figure: From
cable J4101(SAS0) on the motherboard to
J0301 (P2) on the hard drive
backplane.
3 HDD data Upper cable in the figure: From
cable J4102(SAS1) on the motherboard to
J0302 (P3) on the hard drive
backplane.
192 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Internal Cables for the Onboard SAS Controller Card (Eight-Disk Capable
SPARC Enterprise T5140 Servers)
Top cover safety interlock
Motherboard to PDB cable
Hard drive data cables
Routing notes
Routed between CMP Module 0 (CMP0) and
CMP Module 1 (CMP1), then under the chassis
center wall, and then under the fan power board.
Routed along CMP Module 1 (CMP1), then
under the chassis center wall, and then under the
PDB board.