Fujitsu SPARC ENTERPRISE T5140 Service Manual page 225

The following table identifies the components located on the memory mezzanine
assembly and points to instructions for servicing them.
Memory Mezzanine Assembly Components (SPARC Enterprise T5240 Servers)
TABLE:
Item FRU
1 Memory mezzanine
assembly air duct
2 Shipping bracket
3 FB-DIMMs
4 Auxiliary air vent
5 Memory mezzanine
assembly
Replacement Instructions
"Servicing the Memory
Mezzanine Assembly
(SPARC Enterprise
T5240)" on page 118
"Servicing the Memory
Mezzanine Assembly
(SPARC Enterprise
T5240)" on page 118
"Identify Faulty
FB-DIMMs Using the
show faulty
Command" on page 83
"Identify Faulty
FB-DIMMs Using the
FB-DIMM Fault Locator
Button" on page 83
"Servicing the Memory
Mezzanine Assembly
(SPARC Enterprise
T5240)" on page 118
"Servicing the Memory
Mezzanine Assembly
(SPARC Enterprise
T5240)" on page 118
Identifying FRUs in SPARC Enterprise T5240 Servers
Notes
Must be installed to
ensure proper system
cooling.
Optional component.
Must be installed if
shipping the system to
another location.
See configuration rules
before upgrading
FB-DIMMs.
Must be installed to
ensure proper system
cooling.
Must be removed to
access motherboard
FB-DIMMs,
motherboard, power
distribution board,
power supply
backplane, and paddle
card.
FRU Name (If Applicable)
N/A
N/A
See "FB-DIMM
Configuration
Guidelines for SPARC
Enterprise T5240
Servers" on page 98
N/A
/SYS/MB/CMP0/MR0
/SYS/MB/CMP1/MR1
199