Returning The Server To Operation; Install The Top Cover - Fujitsu SPARC ENTERPRISE T5140 Service Manual

Returning the Server to Operation

These topics explain how to return SPARC Enterprise T5140 and T5240 servers to
operation after you have performed service procedures.
"Install the Top Cover" on page 177
■
"Reinstall the Server in the Rack" on page 178
■
"Return the Server to the Normal Rack Position" on page 180
■
"Connect Power Cords to the Server" on page 181
■
"Power On the Server Using the poweron Command" on page 181
■
"Power On the Server Using the Front Panel Power Button" on page 182
■

▼ Install the Top Cover

1. Place the top cover on the chassis.
Set the cover down so that it hangs over the rear of the server by about an inch
(25.4 mm).
2. Slide the top cover forward until it seats.
177