FIGURE:
FIGURE:
8. Loosen the captive screw securing the riser to the motherboard.
9. Lift the riser up to remove it from the system.
Remove the riser and any PCIe/XAUI cards attached to it as a unit.
Related Information
"Install a PCIe/XAUI Riser" on page 107
■
"Remove a PCIe or XAUI Card" on page 109
■
"Install a PCIe or XAUI Card" on page 109
■
106
SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Removing the PCIe/XAUI Riser (SPARC Enterprise T5140)
Removing the PCIe/XAUI Riser (SPARC Enterprise T5240)