Fujitsu SPARC ENTERPRISE T5140 Service Manual page 145

1. Power off the server.
"Removing Power From the System" on page 60
2. Attach an antistatic wrist strap.
3. Remove the top cover.
See "Remove the Top Cover" on page 67
4. Remove the shipping bracket.
Note – The shipping bracket is not required for normal system operation. Some
systems might not have a shipping bracket installed.
5. Open the release levers on either side of the memory mezzanine assembly.
Removing the Memory Mezzanine Assembly
FIGURE:
6. Lift the memory mezzanine assembly up and out of the system.
Place the memory mezzanine assembly on an antistatic mat.
Servicing Motherboard Components 119