3. Slide the backplane down and off the hard drive cage retention hooks.
4. Place the hard drive backplane on an antistatic mat.
Related Information
"Install the Hard Drive Backplane" on page 159
■
▼ Install the Hard Drive Backplane
1. Slide the backplane under the retention hooks on the hard drive cage.
2. Install the No. 1 Phillips screws that secure the backplane to the hard drive
cage.
Two screws secure the backplane in the SPARC Enterprise T5140 server. See the
■
first figure below.
Four screws secure the backplane in the SPARC Enterprise T5240 server. See the
■
second figure below.
Installing a Hard Drive Backplane in a SPARC Enterprise T5140 Server
FIGURE:
Servicing Boards and Components
159