Return The Server To The Normal Rack Position - Fujitsu SPARC ENTERPRISE T5140 Service Manual

▼ Return the Server to the Normal Rack
Position
1. Release the slide rails from the fully extended position by pushing the release
tabs on the side of each rail.
FIGURE:
2. While pushing on the release tabs, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. Reconnect the cables to the back of the server.
If the CMA is in the way, disconnect the left CMA release and swing the CMA
open.
4. Reconnect the CMA.
Swing the CMA closed and latch it to the left rack rail.
180 SPARC Enterprise T5140 and T5240 Servers Service Manual • July 2009
Release Tabs on the Rail