Supported Features; Configuring Ssh - Dell PowerConnect B-RX Configuration Manual

30

Configuring SSH

•
If you are using redundant management modules, you can synchronize the DSA host key pair
between the active and standby modules by entering the sync-standby command at the Privileged
EXEC level of the CLI.
Tested SSHv2 clients
The following SSH clients have been tested with SSHv2:
•
•
•
•
•
•

Supported features

The SSH server allows secure remote access management functions on a device. SSH provides a
function that is similar to Telnet, but unlike Telnet, SSH provides a secure, encrypted connection.
SSHv2 support includes the following:
•
•
•
•
•
•
•
•
•
Configuring SSH
Brocade's implementation of SSH supports two kinds of user authentication:
914
SCP/SFTP/SSH URI Format
SSH Secure Shell 3.2.3
Van Dyke SecureCRT 4.0 and 4.1
F-Secure SSH Client 5.3 and 6.0
PuTTY 0.54 and 0.56
OpenSSH 3.5_p1 and 3.6.1p2
Solaris Sun-SSH-1.0
The following encryption cipher algorithm are supported. They are listed in order of preference:
•
aes256-cbc: AES in CBC mode with 256-bit key
•
aes192-cbc: AES in CBC mode with 192-bit key
•
aes128-cbc: AES in CBC mode with 128-bit key
•
3des-cbc: Triple-DES
Key exchange methods, in the order of preference are:
•
diffie-hellman-group1-sha1
•
diffie-hellman-group14-sha1
Public key algorithm is ssh-dss.
Data integrity is ensured with hmac-sha1 algorithm.
Supported authentication methods are Password and publickey.
Compression is not supported.
TCP/IP port forwarding, X11 forwarding, and secure file transfer are not supported.
SSH version 1 is not supported.
SCP supports AES encryption
BigIron RX Series Configuration Guide
53-1002253-01