Displaying Rp-To-Group Mappings; Displaying Rp Information For A Pim Sparse Group - Dell PowerConnect B-RX Configuration Manual

23
Displaying PIM Sparse configuration information and statistics
This field...
group prefixes
Candidate-RP-advertisement period

Displaying RP-to-group mappings

To display RP-to-group-mappings, enter the following command at any CLI level.
BigIron RX(config-pim-router)# show ip pim rp-map
Number of group-to-RP mappings: 6
Group address
-------------------------------
1 239.255.163.1
2 239.255.163.2
3 239.255.163.3
4 239.255.162.1
5 239.255.162.2
6 239.255.162.3
Syntax: show ip pim rp-map
This display shows the following information.
This field...
Group address
RP address

Displaying RP information for a PIM Sparse group

To display RP information for a PIM Sparse group, enter the following command at any CLI level.
BigIron RX(config-pim-router)# show ip pim rp-hash 239.255.162.1
RP: 207.95.7.1, v2
Syntax: show ip pim rp-hash <group-addr>
The <group-addr> parameter is the address of a PIM Sparse IP multicast group.
This display shows the following information.
620
RP address
99.99.99.5
99.99.99.5
99.99.99.5
99.99.99.5
43.43.43.1
99.99.99.5
Info source: 207.95.7.1, via bootstrap
Displays...
Indicates the multicast groups for which the RP listed by the previous
field is a candidate RP.
NOTE: This field appears only if this BigIron RX is a candidate RP.
Indicates how frequently the BSR sends candidate RP advertisement
messages.
NOTE: This field appears only if this BigIron RX is a candidate RP.
Displays...
Indicates the PIM Sparse multicast group address using the listed RP.
Indicates the IP address of the Rendezvous Point (RP) for the listed PIM
Sparse group.
BigIron RX Series Configuration Guide
53-1002253-01