Clearing Traffic Counters For All Bgp4+ Neighbors; Displaying Bgp4+ Information; Displaying The Bgp4+ Route Table - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

The <ipv6-prefix>/<prefix-length> parameter clears routes associated with a particular IPv6 prefix.
You must specify the <ipv6-prefix> parameter in hexadecimal using 16-bit values between colons
as documented in RFC 2373. You must specify the <prefix-length> parameter as a decimal value. A
slash mark (/) must follow the <ipv6-prefix> parameter and precede the <prefix-length>
parameter.

Clearing traffic counters for all BGP4+ neighbors

To clear the message counters (reset them to 0) for all BGP4+ neighbors, enter the following
command.
BigIron RX(config)# clear ipv6 bgp traffic
Syntax: clear ipv6 bgp traffic

Displaying BGP4+ information

You can display the following BGP4+ information:
NOTE
The show commands implemented for BGP4+ correspond to the show commands implemented for
IPv4 BGP. For example, you can specify the show ipv6 bgp command for IPv6 and the show ip bgp
command for IPv4. Also, the displays for the IPv4 and IPv6 versions of the show commands are
similar except where relevant, IPv6 neighbor addresses replace IPv4 neighbor addresses, IPv6
prefixes replace IPv4 prefixes, and IPv6 next-hop addresses replace IPv4 next-hop addresses.

Displaying the BGP4+ route table

BGP4+ uses filters you define, as well as an algorithm to determine the preferred route to a
destination. BGP4+ sends only the preferred route to the switch's IPv6 table. However, if you want
to view all the routes BGP4+ knows about, you can display the BGP4+ table.
To display the BGP4+ route table, enter the following command at any level of the CLI.
BigIron RX Series Configuration Guide
53-1002253-01
BGP4+ route table.
BGP4+ route information.
BGP4+ route-attribute entries.
BGP4+ configuration information.
Dampened BGP4+ paths.
Filtered-out BGP4+ routes.
BGP4+ route flap dampening statistics.
BGP4+ neighbor information.
BGP4+ peer group configuration information.
BGP4+ summary information.
Displaying BGP4+ information
45
1143

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents