Displaying Ospfv3 Spf Information - Dell PowerConnect B-RX Configuration Manual

Bigiron rx series configuration guide v02.8.00
Hide thumbs Also See for PowerConnect B-RX:
Table of Contents

Advertisement

TABLE 220
This field...
Options
Area
Cost
Type2 Cost
Next-Hop Router
Outgoing Interface

Displaying OSPFv3 SPF information

You can display the following OSPFv3 SPF information:
For example, to display information about SPF nodes in area 0, enter the following command at any
level of the CLI.
BigIron RX# show ipv6 ospf spf node area 0
SPF node for Area 0
SPF node 223.223.223.223,
nexthops to node:
parent nodes:
child nodes: 223.223.223.223:88
SPF node 223.223.223.223:88,
nexthops to node:
parent nodes: 223.223.223.223
child nodes: 1.1.1.1:0
SPF node 1.1.1.1:0,
nexthops to node:
parent nodes: 223.223.223.223:88
child nodes:
Syntax: show ipv6 ospf spf node area [<area-id>]
The node keyword displays SPF node information.
The area <area-id> parameter specifies a particular area. You can specify the <area-id> in the
following formats:
BigIron RX Series Configuration Guide
53-1002253-01
OSPFv3 route information (Continued)
SPF node information for a specified area.
SPF table for a specified area.
SPF tree for a specified area.
:: ethe 3/2
cost: 1,
fe80::2e0:52ff:fe91:bb37 ethe 3/2
Displays...
A 24-bit field that enables IPv6 OSPF routers to support the optional
capabilities. When set, the following bits indicate the following:
V6 – The device should be included in IPv6 routing calculations.
E – The device floods AS-external-LSAs as described in RFC 2740.
MC – The device forwards multicast packets as described in RFC 1586.
N – The device handles type 7 LSAs as described in RFC 1584.
R – The originator is an active router.
DC –The device handles demand circuits.
The area whose link state information has led to the routing table entry's
collection of paths.
The type 1 cost of this route.
The type 2 cost of this route.
The IPv6 address of the next router a packet must traverse to reach a
destination.
The router interface through which a packet must traverse to reach the
next-hop router.
cost: 0,
hops: 0
cost: 1,
hops: 1
hops: 2
Displaying OSPFv3 information
48
1243

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bigiron rx series

Table of Contents