Clearing Bfd Neighbor Sessions - Dell PowerConnect B-RX Configuration Manual

29
Displaying Bidirectional Forwarding Detection information
TABLE 146
This field...
Remote
Stats: Rx
Stats: Tx
Stats: SessionUpCount
Stats: SysUpTime
Session Uptime
LastSessionDownTimestamp
Physical Port
Vlan Id

Clearing BFD neighbor sessions

You can clear all BFD neighbor sessions or a specified BFD neighbor session using the following
command.
910
Display of BFD neighbor detail information (Continued)
Diag
Demand
Poll
MinTxInterval
MinRxInterval
Multiplier
Disc
Diag
Demand
Poll
MinTxInterval
MinRxInterval
Multiplier
Displays...
Value of the "diagnostic" field in the BFD Control Message as used by
the local router in the last message sent.
Value of the "demand" bit in the BFD Control Message as used by the
local router in the last message sent.
Value of the "poll" bit in the BFD Control Message as used by the local
router in the last message sent.
The interval in microseconds between which the router negotiates to
send a BFD message from this local neighbor port to its peer.
The interval in microseconds that the neighbor router waits to receive a
BFD message from its peer on this local port.
The number of times that the neighbor router will wait for the
MinRxInterval time on this port before it determines that its peer router
is non-operational.
Value of the "local discriminator" field in the BFD Control Message as
received in the last message sent by the remote peer.
Value of the "diagnostic" field in the BFD Control Message as received in
the last message sent by the remote peer.
Value of the "demand" bit in the BFD Control Message as received in the
last message sent by the remote peer.
Value of the "poll" bit in the BFD Control Message as received in the last
message sent by the remote peer.
The interval in microseconds between which the router negotiates to
send a BFD message from the remote neighbor port to its peer.
The interval in microseconds that the neighbor router waits to receive a
BFD message from its peer on this remote port.
The number of times that the remote neighbor router will wait for the
MinRxInterval time on this port before it determines that its peer router
is non-operational.
Total number of BFD control messages received from the remote peer.
Total number of BFD control messages sent to the remote peer.
The number of times the session has transitioned to the UP state.
The amount of time that the system has been up.
The amount of time the session has been in the UP state.
The system time at which the session last transitioned from the UP state
to some other state.
The physical port on which the peer is known.
The VLAN ID of the VLAN that the physical port is resident on.
BigIron RX Series Configuration Guide
53-1002253-01