Syslog Messages - Dell PowerConnect B-RX Configuration Manual

Syslog messages

Table 228
following order:
•
•
•
•
•
•
•
•
TABLE 228
Message level
Alert
Alert
Alert
Alert
Alert
Alert
BigIron RX Series Configuration Guide
53-1002253-01
lists all of the Syslog messages. The messages are listed by message level, in the
Emergencies (none)
Alerts
Critical
Errors
Warnings
Notifications
Informational
Debugging
Brocade Syslog messages
Message
Power supply <num>, <location>, failed
Fan <num>, <location>, failed
Management module at slot <slot-num>
state changed from <module-state> to
<module-state>.
Temperature <degrees> C degrees, warning
level <warn-degrees> C degrees, shutdown
level <shutdown-degrees> C degrees
<num-modules> modules and 1 power
supply, need more power supply!!
OSPF Memory Overflow
Syslog messages
Explanation
A power supply has failed.
The <num> is the power supply number.
The <location> describes where the failed
power supply is in the device.
A fan has failed.
The <num> is the power supply number.
The <location> describes where the failed
power supply is in the device.
Indicates a state change in a management
module.
The <slot-num> indicates the device slot
containing the module.
The <module-state> can be one of the
following:
•
active
•
standby
•
crashed
•
coming-up
•
unknown
Indicates an overtemperature condition on
the active module.
The <degrees> value indicates the
temperature of the module.
The <warn-degrees> value is the warning
threshold temperature configured for the
module.
The <shutdown-degrees> value is the
shutdown temperature configured for the
module.
Indicates that the device needs more power
supplies to run the modules in the device.
The <num-modules> parameter indicates the
number of modules in the device.
OSPF has run out of memory.
A
1299