Dell PowerConnect B-RX Configuration Manual page 721

TABLE 106
This field...
TCP connection state
Local host
Local port
Remote host
Remote port
ISentSeq
SendNext
TotUnAck
SendWnd
TotSent
ReTrans
IRcvSeq
RcvNext
RcvWnd
TotalRcv
RcvQue
SendQue
BigIron RX Series Configuration Guide
53-1002253-01
MSDP peer information (Continued)
Displays...
The state of the connection with the neighbor. The connection can have
one of the following states:
•
•
•
•
•
•
•
•
•
•
•
The IP address of the MSDP router's interface with the peer.
The TCP port the MSDP router is using for the BGP4 TCP session with the
neighbor.
The IP address of the neighbor.
The TCP port number of the peer end of the connection.
The initial send sequence number for the session.
The next sequence number to be sent.
The number of sequence numbers sent by the MSDP router that have
not been acknowledged by the neighbor.
The size of the send window.
The number of sequence numbers sent to the neighbor.
The number of sequence numbers that the MSDP router retransmitted
because they were not acknowledged.
The initial receive sequence number for the session.
The next sequence number expected from the neighbor.
The size of the receive window.
The number of sequence numbers received from the neighbor.
The number of sequence numbers in the receive queue.
The number of sequence numbers in the send queue.
Configuring MSDP mesh groups
LISTEN – Waiting for a connection request.
SYN-SENT – Waiting for a matching connection request after having
sent a connection request.
SYN-RECEIVED – Waiting for a confirming connection request
acknowledgment after having both received and sent a connection
request.
ESTABLISHED – Data can be sent and received over the
connection. This is the normal operational state of the connection.
FIN-WAIT-1 – Waiting for a connection termination request from the
remote TCP, or an acknowledgment of the connection termination
request previously sent.
FIN-WAIT-2 – Waiting for a connection termination request from the
remote TCP.
CLOSE-WAIT – Waiting for a connection termination request from
the local user.
CLOSING – Waiting for a connection termination request
acknowledgment from the remote TCP.
LAST-ACK – Waiting for an acknowledgment of the connection
termination request previously sent to the remote TCP (which
includes an acknowledgment of its connection termination
request).
TIME-WAIT – Waiting for enough time to pass to be sure the remote
TCP received the acknowledgment of its connection termination
request.
CLOSED – There is no connection state.
23
645