32
Displaying MAC Port Security information
TABLE 153
This field...
Port
Count
Secure-Src-Addr (S)
VLAN
Age-Left
Displaying MAC Port Security statistics
You can display MAC Port Security statistics for an interface or for a module.
For example, to display MAC Port Security statistics for interface 7/11.
BigIron RX# show port security statistics e 7/11
Port
----- ----------- ------------- --------- ------------------
7/11
Syntax: show port security statistics <portnum>
TABLE 154
This field...
Port
Total-Addrs
Maximum-Addrs
Violation
Shutdown/Time-Left
To display MAC Port Security statistics for a module, enter the following command.
BigIron RX# show port security statistics 7
Module 7:
Total ports: 0
Total MAC address(es): 0
Total violations: 0
Total shutdown ports 0
Syntax: show port security statistics <module>
TABLE 155
This field...
Total ports
Total MAC address(es)
958
Output from the show port security mac command
Displays...
The slot and port number of the interface.
The number of MAC addresses secured on this interface.
The secure MAC address. (S) means "secure".
ID of VLAN to which the interface is assigned.
The number of minutes the MAC address will remain secure.
Total-Addrs Maximum-Addrs Violation Shutdown/Time-Left
1
Output from the show port security statistics <portnum> command
Displays...
The slot and port number of the interface.
The total number of secure MAC addresses on the interface.
The maximum number of secure MAC addresses on the interface.
The number of security violations on the interface.
Whether the interface has been shut down due to a security violation and the
number of seconds before it is enabled again.
Output from the show port security statistics <module> command
Displays...
The number of interfaces on the module.
The total number of secure MAC addresses on the module.
1
0
no
BigIron RX Series Configuration Guide
53-1002253-01