1.
EXTERIOR COVERS
[C]
1.1
LEFT SIDE COVER REMOVAL
1.1.1 Left Upper Cover
1. Remove the left upper cover [A] (2 screws).
1.1.2 Left Lower Cover
1. Open the paper path section [B].
2. Remove the left lower cover [C] (2 screws).
1.2
RIGHT SIDE COVER REMOVAL
1.2.1 Right Upper Cover
1. Remove the right upper cover [D] (2 screws).
1.2.2 Right Lower Front, Right Lower Middle, and Right Lower Rear Covers
1. Open the paper path section.
2. Remove the right lower cover [E] (2 screws), right lower middle cover [F], and
toner collection bottle [G].
3. Remove the right lower rear cover [H] (1 screw).
1.3
REAR COVER REMOVAL
1.3.1 Rear Cover
1. Remove the rear cover [I] (2 screws).
NOTE: When re-installing the rear cover, push in the rear cover hooking
portion [J] over the copier bottom plate as shown.
SM
[A]
[B]
[D]
5-1
[J]
[I]
[H]
[G]
[F]
[E]
A163