Power Source - Ricoh FW780 Service Manual

3.1.4 POWER SOURCE

Important:
The machine must be installed in a building/facility equipped with a protective
device such as a circuit breaker, as the machine relies on such devices for
protection against over-current and short circuits.
1. Input Voltage Level:
2. Permissible Voltage
Fluctuation:
3. Do not set anything on the power cord.
NOTE: 1) Make sure the plug is firmly inserted in the outlet.
2) Avoid multi-wiring.
SM
INSTALLATION REQUIREMENTS
120 V, 60 Hz
More than 12 A (for U.S.A. version)
220 ~ 240 V, 50/60 Hz
More than 7 A (for European version)
10%
3-3 B047/B048