Anticondensation Heater Installation - Ricoh FW780 Service Manual

7.2

ANTICONDENSATION HEATER INSTALLATION

[A]
[B]
1. Remove the rear cover of the machine (2 screws).
2. Remove the T&S corona unit.
3. Install the anticondensation heater [A] (3 screws).
4. Put the harness of the heater into the cutout [B] of the frame.
5. Connect the connector of the heater [C] with the one beside the ac drive
board.
SM
[C]
5-37
[C]
A163