Service Program Mode Table - Ricoh FW780 Service Manual

3.1.2 Service Program Mode Table

1: A "*" before the mode number means that the mode can be accessed by
custormers or sales representative.
2: In the data colum, the default value is printed in bold letters. The default
settings for several items depend on the machine destination (refer to page
4-26.).
Mode No.
Fusing
Temperature 1
(Normal)
*1
Fusing
Temperature 2
*2
(High)
Fusing
Temperature 3
*3
(Low)
Copy Count
*4
Up/Down
Beeper On/Off
*5
Paper Feed Out
Waiting Time
*6 Setting
Manual Feed Start
Time Setting
*7
A163
Function
Selects the fusing temperature for plain
paper.
Selects the fusing temperature for translucent
paper.
Selects the fusing temperature for translucent
film.
Selects the copy count amount up or down.
Selects if the beeper sounds or not.
Selects the time to when the paper is
automatically fed out after it has been set on
the manual table, or after the Roll Feed
Select key is pressed.
Selects the time to when the registration
roller starts rotating after the entrance sensor
detects the paper leading edge.
4-10
Data
0: Mode 1
1: Mode 2
2: Mode 3
3: Mode 4
4: Mode 5
5: Mode 6
6: Mode 7
0: Mode 5
1: Mode 6
2: Mode 7
3: Mode 8
0: Mode 2
1: Mode 3
2: Mode 4
3: Mode 5
0: Up
1: Down
0: On
1: Off
2: Only when the
edge margin or
paper length is
changed
continuously,
the beeper is off.
0: 2 minutes
1: 1 minute
2: 3 minutes
3: 4 minutes
4: 5 minutes
0: 2 seconds
1: 0.7 second
2: 1 second
3: 3 seconds
4: 4 seconds
5: 5 seconds
SM