Fiber Optics Array Removal - Ricoh FW780 Service Manual

2.4

FIBER OPTICS ARRAY REMOVAL

[A]
1. Follow the steps from 1 to 3 of the exposure lamp removal.
2. Remove the original registration sensor bracket [A] (1 screw).
3. Lift up the fiber optics array [B] and remove it from the left side by sliding it
out to the right side as shown.
NOTE: When reassembling, be careful not to damage the right side [C] of
the fiber optics array by touching the optics side plate [D].
A163
[C]
[B]
5-4
[D]
SM