Roll Feed Leading Edge Sensor Replacement - Ricoh FW780 Service Manual

ROLL FEED LEADING EDGE SENSOR REPLACEMENT

3.2 ROLL FEED LEADING EDGE SENSOR
REPLACEMENT
[B]
[C]
[A]
[D]
B436R107.WMF
1. Pull out the roll feed unit.
2. Remove the sensor casing [A] (2 screws).
3. Replace the leading edge sensor [B] (1 screw and 1 connector).
NOTE: When reinstalling the sensor casing, be sure to align the sensor casing's
pins [C] with the holes [D] in the sensor bracket.
B435/B436 7-8 SM