Roll End Sensor Replacement - Ricoh FW780 Service Manual

ROLL END SENSOR REPLACEMENT

3.6 ROLL END SENSOR REPLACEMENT
[B]
[A]
[D]
[C]
1. Remove the 2 screws [A] holding the clamps for the power supply cord.
2. Remove the roll feed rear cover [B] (6 screws).
3. Remove the roll end sensor bracket [C] (1 screw and 1 hook).
4. Replace the roll end sensor [D] (1 screw and 1 connector).
B435/B436 7-12 SM