Time Out Of Exec Privilege Mode - Dell Force10 C150 Configuration Manual

Step Task
3 If you used the line authentication
method in the method list you
applied to the terminal line,
configure a password for the terminal
line.
In Figure 4-6 VTY lines 0-2 use a single authentication method,
Figure 4-6. Configuring Login Authentication on a Terminal Line
FTOS(conf)#aaa authentication login myvtymethodlist line
FTOS(conf)#line vty 0 2
FTOS(config-line-vty)#login authentication myvtymethodlist
FTOS(config-line-vty)#password myvtypassword
FTOS(config-line-vty)#show config
line vty 0
password myvtypassword
login authentication myvtymethodlist
line vty 1
password myvtypassword
login authentication myvtymethodlist
line vty 2
password myvtypassword
login authentication myvtymethodlist
FTOS(config-line-vty)#

Time out of EXEC Privilege Mode

EXEC timeout is a basic security feature that returns FTOS to the EXEC mode after a period of inactivity
on terminal lines.
To change the timeout period or disable EXEC timeout.
Task
Set the number of minutes and seconds.
Default: 10 minutes on console, 30 minutes on VTY.
Disable EXEC timeout by setting the timeout period to 0.
Return to the default timeout values.
View the configuration using the command
Command Syntax
password
Command Syntax
exec-timeout
no exec-timeout
show config
from LINE mode.
Command Mode
LINE
line
.
[ ]
minutes seconds
System Management | 71
Command Mode
LINE
LINE