Enable Ethernet Cfm; Create A Maintenance Domain - Dell Force10 C150 Configuration Manual

Enable Ethernet CFM

Task
Spawn the CFM process. No CFM configuration is
allowed until the CFM process is spawned.
Disable Ethernet CFM without stopping the CFM
process.

Create a Maintenance Domain

Connectivity Fault Management (CFM) divides a network into hierarchical maintenance domains, as
shown in Figure
Step Task
1 Create maintenance domain.
2 Display maintenance domain information.
FTOS# show ethernet cfm domain
Domain Name: customer
Level: 7
Total Service: 1
Services
Domain Name: praveen
Level: 6
Total Service: 1
Services
5-1.
MA-Name
My_MA
MA-Name
Your_MA
Command Syntax
ethernet cfm
disable
Command Syntax
domain name md-level number
Range: 0-7
show ethernet cfm domain
brief
]
VLAN CC-Int
200 10s
VLAN CC-Int
100 10s
Command Mode
CONFIGURATION
ETHERNET CFM
Command Mode
ETHERNET CFM
[ name | EXEC Privilege
X-CHK Status
enabled
X-CHK Status
enabled
802.1ag | 83