Apply A Privilege Level To A Username; Apply A Privilege Level To A Terminal Line; Configure Logging - Dell Force10 C150 Configuration Manual

Apply a Privilege Level to a Username

To set a privilege level for a user:
Task
Configure a privilege level for a user.

Apply a Privilege Level to a Terminal Line

To set a privilege level for a terminal line:
Task
Configure a privilege level for a terminal line.
Note: When you assign a privilege level between 2 and 15, access to the system begins at EXEC mode,
but the prompt is hostname#, rather than hostname>.

Configure Logging

FTOS tracks changes in the system using event and error messages. By default, FTOS logs these messages
on:
• the internal buffer
• console and terminal lines, and
• any configured syslog servers
Disable Logging
To disable logging:
Task
Disable all logging except on the console.
Disable logging to the logging buffer.
Disable logging to terminal lines.
Disable console logging.
Command Syntax
username username privilege level
Command Syntax
privilege level
level
Command Syntax
no logging on
no logging buffer
no logging monitor
no logging console
Command Mode
CONFIGURATION
Command Mode
LINE
Command Mode
CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION
System Management | 61