script apply
This command backs up the running configuration and then starts applying the commands in the script
file. Application of the commands stops at the first failure of a command.
script apply scriptname
Syntax
The scriptname is the file name of the script file (including extension) to be applied. The script name
must be "startup-config" or have a file extension of ".scr".
Mode
Privileged Exec
Use the show running-config command to capture the running configuration into a script. Use the
Usage
copy command to transfer the configuration script to/from the switch.
Related
copy
Commands
show running-config
script delete
This command deletes a specified script.
script delete { scriptname | all}
Syntax
Parameters
scriptname
all
Mode
Privileged Exec
script list
This command lists all scripts present on the switch as
script list
Syntax
Mode
Privileged Exec
Configuration Script Name
Report Elements
Size (Bytes)
Downloads files to the switch and uploads files from the switch. Copies files
within the system and between switches.
Display/capture the current setting of different protocol packages supported
on the switch.
File name, including extension (".scr"), of the configuration script to be deleted
Deletes all configuration script files from the switch.
well a
s the total number of files present.
System Configuration Commands | 123