Cpc Detect Timing-Outgoing Co Calls (Cpc) - Panasonic KX-T336 System Reference Manual

49.00 CPC Signal Detect Timing-
Outgoing CO Calls (CPC)
Description
CPC command is used to make CPC (Calling Party Control) signal detection
effect on outgoing CO calls as well as on incoming CO calls.
Refer to Section 3-F-7.00 "Calling Party Control (CPC) Signal Detection" for
further information.
(Password level: Three or higher)
Input Format
p)qqxzj~~ICRc-I]
Index Number
I
Index Number Explanation
I
1011 to 3158
I
Physical Number of the Trunk Port
I
Input Value for ltem Number
&
Assigning Items Input Value
None
CPC signal detect timing 00 : CPC signal is not detected
(for outgoing CO calls) 01 : 6.5 ms
.*
0?:16ms(8Nms N=2to75)
.
7; : 600 ms
(Default = 00)
Conditions
Some switching system of central office may send CPC-like signal in dialing
sequence and the attempt of making a call may be terminated.
If your switching system does not send CPC-like signal in dialing sequence,
we recommend to make CPC signal detection work on outgoing CO calls.
CPC signal detection can be assigned to incoming CO calls only or both on
incoming and outgoing CO calls. If CPC signal detection is assigned to
outgoing CO calls only, it does not function.
1 o-c-75