Panasonic KX-T336 System Reference Manual page 433

C. Operation
Introduction
Procedures for performing PITS station
programming are described in tables and
operation charts.
The tables show the procedures in the following
form:
1 Operation 1 Result lComment/Not~
I
I I
I
1) Describes actual operation.
2) Shows the result from the operation.
3) Comment or note on the operation.
Operation chartsare attached to the tables to help
you to understand the flow.
Note:
The procedures in this section are described
from the viewpoint of type 30 PITS
telephone users. If KX-l7030 or KX-vj 30
is used in PITS station programming mode,
press the STORE button instead of
MEMORY button. . .
12-C-l