Card Test Procedure - Panasonic KX-T336 System Reference Manual

3.03 Card Test procedure
Enter the test command according to the card test
format below.
=> x y y
TL cardNo.(o,-15,or**)
Shelf No. (1: Basic 2: Expansion 1
3: Expansion 2)
(Note) "*" can be used as a wild card character
&*" or yJc** means "All
1 ** means all cards in the basic shelf
(Example)
Executing card No. 208 test
2
3
4
(Note) When you test the DISA card, the following
message appears on the screen
=> 105 cOGM Test ? Y/N/C>
When you select "Y", the previously recorded OGM
message is erased.
When you finish the card test, go to the Test Main
Menu by pressing the <END> key.
14-F-5