Panasonic KX-T336 System Reference Manual page 409

C. Operation
Introduction
P:o&ures for setting PITS system programming
mow
and
performing PITS system programming
are cescribed in tables and operation charts.
The tables show the procedures in the following
form.
1) Describes actual operation.
2) Shows the result from the operation.
3) Comment or note on the operation.
Operation charts are attached to the tables to
help you to understand the flow.
The procedures for setting PITS system program-
ming mode are explained first in "Setting PITS
System Programming Mode."
The procedures for PITS system programming
are explained in each programming item.
Note: The procedures in this section are
described from the viewpoint of type 30
PITS telephone users. If KX-l7030 or
KX-T7130 is used in PITS system
programming mode, press the STORE
button instead of MEMORY button.
11 -C-l