Panasonic KX-T336 System Reference Manual page 483

To change the extension numbers of the entries which include
depmmen! -Pvj+Y to 200. enter :
DIG > SET - '/Project 200//
The specifiec entnes NilI be changed as follows:
<Example 2>
To change 'all the extension numbers from 1000 through1 999 to
1000, enter:
DIC > SET 1 */*P
1 OOO//
If the extension number is three digits, "0" must be entered as the
leading digit.
<Example 3~
To change all the extension numbers from 310 through 319 to 400,
enter :
DIC > SET 031*/*/* 400//
As shown in formats 3 and 5 through 10, the wild card character w
is used to change data without specifying sub parameters.
Insert one space between original data and new data.
Displayed Message
Disalaved Messaae
I
Meaning
-.-s-.-I - -
- Error: illegal main command
There is an error in the main command.
+-++ Error: Illegal sub command
There is an error in the sub command.
++-H Error: Input data do not exist.
Entered data has not been stored.
- Set complete Changing the data is completed.
- Total 3 entries
There are three entries to be changed.
13-B-l 1