Panasonic KX-T336 System Reference Manual page 441

Continued
Operation
Result
Comment/Note
l
To assign Ringing Transfer
l
The following message
feature, dial "8." appears on the display:
MOl/P : RING TRNS
l
To
assign Call Splitting
feature, dial "9."
l
The following message
appears on the display:
MOl/P : Split
l
To assign Call Forwarding /Do
Not Disturb (FWD/DND)
feature, dial "0."
l
This feature is assignable only
to the PF3 button of PITS type
50.
Refer to Section 4-k-2.01
"Location of Feature Buttons"
for further information.
l
To assign Tone Through
Break feature, dial "* ."
l
The following message
appears on the display:
MOl/P : Tone Break
l
To assign Saved Number
l
The following .mes&age
l
This feature is assignable only
Redial (SNR) feature, dial "#."
appears on the display:
to the PFl button of PITS type
50, KX-17020 and KX-l7030.
MOl/P : SNR
J
. .
I. Press the MEMORY button to
l
The MEMORY button indicator
store the assignment. lights in red.
l
Confirmation tone sounds.
l
'Initial display fcrw:PITS;-
station programming mode" is
displayed again.
5. To conclude PITS station
l
PITS station programming
programming mode, slide the mode is concluded and returns
MEMORY switch on the PITS
to operation mode.
to 'SET."
1 -lImiF
SET* * PROGRAM
MEMORY
12-c-9