Panasonic KX-T336 System Reference Manual page 232

Description of Assigning Items
DN
Assigns the Floating DN of the Attendant Console. This is used to call the
Attendant directly.
TRS LV
Assigns the toll restriction level for the Attendant Console.
PAG Assigns the available Paging types for the Attendant Console. This can
be set to internal, external or all.
The types of External Paging are limited to those preset to "Yes" in the
System-Operation (l/3) screen. If Paging External Pagers 1 and 2 are
both preset to y No" in the screen, '-" appears on this item.
Overflow Assigns the destination of Overflow calls in the Day mode. Overflow
occurs when all the loop keys are active, another call arrives and one of
the calls has exceeded the time allowed for overflow. The calls are
queued at the overflow destination as well as the console.
Night Assigns the destination of the attendant-seeking calls (DPH, DID, DISA,
Extension) in the Night mode.
Busy-Out Extension Assigns the destination of incoming calls, if the trunk group's call destina-
tion is programmed to Attendant Console but the Attendant Console is in
Busy Out status (ATT-FWD switch on the attendant console is set to ON).
. Conditions
This screen cannot be selected if "System-Configuration", Slot Assignment has
no "ATLc* card programmed.
Tenant
Y -" will be displayed if "System-Operation",
Tenant Service is set to "No."
When pressing the NEXT key, this screen changes as follows:
Function
The following functions appear on the function line of this setting screen.
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen. The operation of function keys are described
in Section 7-l "Operatin of Funciton Keys."
9-G-29