Panasonic KX-T336 System Reference Manual page 439

2.00 PF (Programmable Feature)
Button Assignment
Assigning various functions to the PF buttons of
the individual PITS telephone and DSS Console
is explained here.
The explanation of the message display applies
only to a PITS provided with the display.
Operation
Result
Comment/Note
. Set the MEMORY switch at
l
The following message
l
This display is called "Initial
the rear of PITS to appears on the display:
display for PITS station
"PROGRAM."
programming mode."
Pfrl
PITS-PGM No.?+
l
From now on in any status,
pressing the END button
SET-. PRcGRAu
MEMORY
l
The MEMORY button indicator
restores this status.
lights in red.
. If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
!. Press a PF button.
NQ
q
I
l
Previously stored data appears
on the display.
<Example>
If preset to one touch dialing
button
. .
+
l
Stored data as one touch
MOl/P: 9-l-201 -12
dialing.
L
l
If nothing is stored, "Not
Stored" appears.
, _
l
To scroll, "-
I
use the + or ----, button.
(Note)
>
l
,P" means PF button of the
PITS. If PF button on DSS
console associated with PITS
is pressed, "c" appears
instead of "P."
>
l
PF button number.
l
The MEMORY button indicator
l
If nothing is entered within one
light goes out.
minute after pressing a PF
button, "Initial display for PITS
station programming mode" is
displayed again.
Continued
12-C-7