Panasonic KX-T336 System Reference Manual page 81

2.Type of Mode
Three types of Show type, Auto type and Batch
type are available.
1) Show Type-SH
Enables you only to read the preset data.
The preset data cannot be changed by this type.
<Example> -
Displaying the data in System Assignment
Enter:
; PRG>SYA SH (,+I )
a
Displays the follows:
; 1EqansionSheli -+N
; 2 Additional CONF ---) N
; PRG>Fj
2) Auto Type-AT
Enables you to show or edit the data in an
interactive format.
Showing the data
Each item appears one by one by every pressing
of the RETURN key.
Editing the data
If you do not want to change the data, press the
RETURN key when : INPUT>>fl is displayed.
If you want to change the data, enter the
appropriate values after ; INPUT>>fl, then press
the RETURN key.
To save the data after changing it. be sure to
enter $EOD after ; INPUT>> fl, then press the
RETURN key.
<Example>
Changing the data in System Assignment
Enter:
; PRG>SYA AT (4 )
To change N to Y, enter Y ( c]).
a
Next item appears:
; 2:AdditionalCONF ---) Y
; INPUT>> 0
To save the data of item 1, enter $EOD bJ):
u
Concludes AT mode
PRG>O
8-D-2