Panasonic KX-T336 System Reference Manual page 413

Operation chart for setting date and time
PlTS.sy#em ,programming
(I')
mode ': :.<;:, . . ..f..::
<Status 1>
SYS-PGM No? 4
Initial display for PITS system programming
mode
W
The current date and time appears on
the display.
The MEMORY button indicator light goes
out.
l
Dial the date and time.
l
To clear a wrong entry, press the END
button, then dial "0 0" and enter again.
W
Dialed number appears on the display.
Confirmation tone sounds.
The MEMORY button indicator lights in
red.
L
Note:
In PITS system programming mode, you can return to
"Initial display for PITS system programming mode"
(Status 1) by pressing the END button.
a Operation
0 Result
11 -c-5