Panasonic KX-T336 System Reference Manual page 174

Description
of Assigning
Items
NL-Code
Assigns the New Line code, for Carriage Return, for SIO #1 (Terminal),
St0 #2 (SMDR : Station Message Detail Recording) and Remote (MODEM).
Baud Rate Assigns the Baud rate for SIO #1, SIO #I2 and Remote. The baud rate is the
number of bits transmitted per second between this system and the device.
Word Length Assigns the data length for SIO #l , SIO #I2 and Remote. The data length is the
number of bits required per character.
Parity Assigns the type of Parity check for SIO fcl , SIO #2 and Remote. Mark and
space means that there is a fixed polarity parity bit for each character. Even and
odd means that the number of bits including the parity bits is even or odd.
(1,3,5,7,9 etc. is odd 2,4,6,8, etc. is even)
Stop Bit Assigns the number of Stop bit for SIO #l, SIO #2 and Remote. Stop bits are
used to signal the end of a character and that the next bit received is the start bit
of the next character.
Conditions
It is possible to change assigning items in "System-Communication Interface" while
On-site administration or Remote administration is performed or SMDR is being
printed out. New setting becomes effective when those operation modes are
finished.
Function
The following functions appear on the function line of this setting screen.
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen.
For operation, refer to Section 7-l "Operation of Function Keys."
9-D-67