Panasonic KX-T336 System Reference Manual page 526

Hide thumbs Also See for KX-T336:
Table of Contents

Advertisement

2.00 Definition
of Operating
Status
2.01 Shelf, Slot, Resource
Not-Installed:
Programming
data for the target device are not
entered at all. In other words, even if the device
is physically installed in the system, no
programming
has been performed.
Out of Service (OUS):
Programming
data for the target device is
entered, but the target device is not assigned to
the system.
In Service (INS):
The target device is operating
normally.
Fault (FLT):
The device is defective (hardware).
In this case the LED indicator on the card is lit.
2.02 Port
Not-Installed:
The slot (upper device of port) is not
programmed
even though the card may be
physically installed.
Pre-Installed
Programming
data for the slot (upper device of
port). is entered, but programming.data
for the
port is not entered.
Out of Service (OUS):
Programming
data for the target device is
entered, but the target device is not assigned to
the system.
In Service (INS):
The target device is operating normally.
2.03 Interactions among Devices
Interactions
among Shelf, Slot, Port and
Resource are as follows.
Shelf>Slot>Port,
or Shelf>Slot>Resource
(See the illustration below)
Shelf
($z-:g>
l
The resource is a lower device of a slot. There
are no interactions
between resources and
ports.
(Example)
PB receiver on the SLC (Single tine Telephone
Circuit) card.
Fault (FLT):
Defective device (hardware).
14-c-4

Advertisement

Table of Contents
loading

Table of Contents