Panasonic KX-T336 System Reference Manual page 456

7.00 Confirmation of Directory
Number/Port Number
Enables an extension of a PITS with display to
confirm its own directory number and port number
(physical number) displayed on the display by the
following operation:
Operation
Result
Comment/Note
1. Set the MEMORY switch at
l
The foliowing message
the rear of PITS to
l
This display is called "Initial
appears on the display:
"PROGRAM."
display for PITS station
programming mode."
PITS-PGM No.%
SET*. PROGPAM
l
If the following message
l
The MEMORY button indicator appears on the display, the
lights in red. programming data of your
PITS has already been
accessed by another
administration device.
Already Accessed
l
From now on, in any status,
pressing the END button
restores this status.
2. Dial "03."
l
The physical number and the
l
If nothing is entered within one
directory number appear on minute after dialing "03," 'Initial
display for PITS station
programming mode" is shown
again on the display.
PlOllW DNllll
l
The MEMORY button indicator
light goes out.
l
To conclude PITS station
programming mode, slide
the MEMORY switch to
"SET."
l
PITS station program mode
is concluded and returns to
the operation mode.
12-C-24